3

Axial Piston Pumps

Casappa

Piston Plata

Pump

  • Possibility to have on the pressure line a three-position electrically controlled valve with relief valve
  • Possibility to mount an auxiliary gear pump with common suction
  • Internal drain

Plata LF
Fixed displacement axial piston pumps and motors swash plate design for open circuit applications.

Features
The design is extremely compact and it can integrate many functions.
An electrically controlled valve can be fitted on the pump and an electronic board controls the flow and the speed of the powered motor.
Unidirectional pumps LFP48:
displacements from 1.65 in³/rev (27 cm³/rev) to 2.94 in³/rev (48,2 cm³/rev)
Reversible motors LFM30:
displacements from 1.34 in³/rev (22 cm³/rev) to 1.84 in³/rev (30,2 cm³/rev)
Max. peak pressure up to 5075 psi (350 bar)

Motor

  • Reversible rotation with integral antishock valves
  • European and SAE standard mounting flanges
  • Side or rear inlet options
  • Compact size

Piston Plata LVP

Controls

  • Pressure compensator
  • Flow and pressure compensator (Load Sensing)
  • Torque limiter
  • Electrohydraulics servocontrols

Plata LVP
Variable displacement axial piston pumps swash plate design.

Features
PLATA pumps are ideally suited for medium and high pressure open circuit applications

Displacements from 1.74 in³/rev (28,49 cm³/rev) to 5.37 in³/rev (87,9 cm³/rev)
Max. peak pressure up to 5075 psi (350 bar)
Max. speed up to 3000 min-1

  • Energy savings
  • Low noise emission
  • Short response time
  • Drive shaft bearing suitable for radial and axial loads
  • Multiple combinations

Piston MVP

Controls

  • Min. and max. displacement limiter.
  • Pressure compensator.
  • Flow and pressure compensator (Load-Sensing).
  • Torque limiter.

MVP
Variable displacement axial piston pumps swash plate design ideally suited for open circuit in mobile hydraulic applications.

Features
The compact design allows to be mounted directly on engine motors.

Displacements from 28 cm3/rev (1.74 in3/rev) to 84.7 cm3/rev ( 5.17 in3/rev).
Max. peak pressure up to 350 bar (5100 psi.)
Max. speed up to 3500 min-1

  • Exceptional working life expectancy.
  • Low noise emission.
  • Drive shaft bearing suitable for radial and axial loads.
  • Multiple combinations.
Piston Plata DVP

Plata DVP and Plata SVP
Variable displacement axial piston pumps swash plate design for open circuit applications.

Features
SVP single flow, DVP dual flow on piston pump and an additional piggybacked gear pump.
The automatic overall torque limiter allows to optimize the performance of the machine.
SVP and DVP pumps has been designed specifically for mini excavators where compactness and ease of installation are critical.
Piston pump: displacements from 0.48 in³/rev (7,8 cm³/rev) to 0.91 in³/rev (30 cm³/rev)
Gear pump: displacements from 0.30 in³/rev (4,95 cm³/rev) to 1.29 in³/rev (21,14 cm³/rev)
Max. speed up to 2600 min-1

  • Compact design
  • Torque limiter
  • Energy savings
  • Low noise emission
  • Long service life

Different combinations are available.

View the Casappa Fixed Displacement Axial Piston Pumps web page.

View the Casappa Variable Displacement Axial Piston Pumps web page.

View the Casappa Hydraulics Gear Motors web page.

Available in: Arizona, S. Idaho and Utah.

Web Statistics