AIRPRO

AIRPRO Logo.jpg

 

Pneumatic Cylinders

airpr250.jpg

AIRPRO 250 - NFPA Interchangable Pneumatic Cylinders

Designed to meet the needs of machine builders today, tomorrow, and beyond. Over fifty years of cylinder manufacturing experience has been built into this lightweight, but durable design.

Features:

  • BORE SIZES 1.5" UP TO 6"  - Available bores 1.5", 2", 2.5", 3.25", 4", 5", 6" with various types of mountings and rod end accessories.
  • HIGH STRENGTH PISTON ROD - Piston rods are hard chrome plated to resist scoring and corrosion and assure maximum seal life.
  • NON-ROTATING RODS AVAILABLE - Hexagonal rods eliminate the need for whirl-stop guides. We have an entire series of non-rotating rod cylinders, which enable construction of more functional systems.
  • MAGNET INTEGRATED IN PISTON - Pistons come equipped with a magnet. Mounting a magnetic proximity switch will convert a basic cylinder into a position indicator without internal modification.
  • ADJUSTABLE CUSHIONS - Cylinders come standard with adjustable cushions in both the head and cap.

For more information, download the AIRPRO Pneumatic Cylinder 250 Series data sheet.

 

sh3.jpg

SH3 Series - Parallel Gripper

  • Parallel grippers (SH3 Series) are designed for use in industrial applications such as robotics, pick & place, transfer, clamping and accurate positioning.
  • Compact size, light in weight and simple in structure are features of all models.
  • Internally, action lever supported by bearings control the parellel finger movement.
  • All models (except SH3-pc02) can be mounted with Auto Switch capability.

For more information, download the AIRPRO Parallel Gripper SH3 Series data sheet.


usv2.jpg

USV2 Series - Angular Gripper

With Auto Switch Capability

Theoretical Gripping Force: 3.3~43 lbs

  • Angular gripers (USV2 Series) are designed for use in industrial applications such as robotics, pick & place, transfer, clamping and accurate positioning.
  • Compact in size, light in weight and simple in structure are features of all models.
  • Low cost design.
  • Toolings are easily attached with slotted and tapped in body.
  • Al models (except Single Acting/Normally Closed type) can be mounted with Auto Switch capability.
  • Shank side mounting female thread is compatible with rod male thread of interchangeable cylinder.

For more information, download the AIRPRO Angular Gripper USV2 Series data sheet.


utam4.jpg

UTAM4 Series - Air Motor

Radial Piston Type

  • Torque Range: 0.5~40 ft-lb
  • Horse Power: 0.1~0.31 HP
  • Reversible Type

No sparks. Complete Burst Proof Direct & Geared Round Shaft Drive.

  • AIRPRO air motors are designed for for use in industrial applications such as powering air driven machinery, raising foundry copes and drags, rotating a turntable, mixing paint, powering cranes, valve actuation and power source for mechanical hands.
  • Speed could be easily controlled by flow adjustment from 100 r.p.m. up to Max. speed.
  • Compact in size, light in weight and simple in structure are features of all models.
  • AIRPRO air motors can be mounted any way you like - Flange mounting and foot mounting are
    available.
  • Air lines should be equipped with lubricators. Mount the lubricator as close as to the motor as possible.

For more information, download the AIRPRO Air Motor UTAM4 Series data sheet.

 

u100s1b.jpg

AIRPRO U100S-1 Hydraulic Cylinders

Designed to meet the needs of machine builders today, tomorrow, and beyond. Over fifty years of cylinder manufacturing experience has been built into this lightweight, but durable design.

Features:

  • BORE SIZES 1.25" UP TO 3.25" - Available bores 1.25", 1.5", 2", 2.5", 3.25".
  • ALUMINUM BODIES - Lightweight, compact hydraulic cylinders with bodies constructed of a special aluminum alloy. Operating at up to 1500 PSI pressure (10MPa).
  • MAGNETIC PROXIMITY SWITCH - Magnetic proximity switch (Reed type, Hall Effect type) is available as standard. (Cylinder dimensions are the same for both standard and switch set type).
  • INTERCHANGEABLE - Mounting dimensions completely interchangeable with U160S-1 Series, which has a steel body.

For more information, download the AIRPRO Hydraulic Cylinder U100S-1 Series data sheet.

 

u160s1b.jpg

AIRPRO U160S-1 Hydraulic Cylinders

Designed to meet the needs of machine builders today, tomorrow, and beyond. Over fifty years of cylinder manufacturing experience has been built into this lightweight, but durable design.

Features:

  • BORE SIZES 0.75" UP TO 3.25" - Available bores 0.75", 1", 1.25", 1.5", 2", 2.5", 3.25".
  • STEEL BODIESLightweight, compact and durable hydraulic cylinders with bodies constructed of steel. Operating at up to 2300 PSI pressure (16MPa).
  • SMALLER SIZEWith no mounting accessories needed, the mounting space is smaller than the conventional cylinder.
  • IMPROVED WEAR RESISTANCE - Rod gland constructed of a special copper alloy for improved wear resistance.
  • INTERCHANGEABLEMounting dimensions completely interchangeable with U100S-1 Series, which has an aluminum body.

For more information, download the AIRPRO Hydraulic Cylinder U160S-1 Series data sheet.

 

Available in: Idaho, Nevada and Utah

Web Statistics