|
|
Special Components and Accessories
Power unit design and assembly can be greatly simplified by use of Magnaloy Pump/Motor Mounts.
Direct mounting of flange-mount pumps to NEMA C face motors via
pump/motor mounts eliminates the need for a coupling guard, foot
brackets, shims, risers and a mounting plate. The result is the easiest
to install, most cost effective method available to mount a pump and
motor. Both horizontal and vertical styles are available. For a
complete catalog, or application assistance, contact your local Womack
sales professional.Magnaloy Pump/Motor Mounts are cast
of a lightweight high strength aluminum alloy and incorporate many
unique design features. Custom molded OSHA Orange coupling access
covers are included with all mounts for NEMA frames 182 and larger.
Most Magnaloy mounts are supplied with a pre-cast drain hole for
residual fluids. This aids in quicker detection of leaky seals and
other trouble areas.For more detailed information view the Magnaloy Pump/Motor Mounts pages from the Womack 365 Product Catalog.
Magnaloy is the original lightweight, heavy-duty flexible-drive coupling. Magnaloy couplings are manufactured from magnesium material which is 76% lighter than cast iron and 36% lighter than aluminum.
Close
matching tolerances assures vibration-free operation without need for
special tools. Solid magnesium alloy sand castings are heat treated and
offer the highest strength to-weight ratio available. Both clamp and
spline type couplings are available.
For more detailed information view the Magnaloy Flexible Drive Couplings page from the Womack 365 Product Catalog.
  FSA / FSK Series
ApplicationThe HYDAC FSA-Visual Fluid Level Indicators and FSK-Electrical Fluid Indicators are used for monitoring fluid levels and temperature in various types of reservoirs. Typical applications are hydraulic system reservoirs and lubricating, cutting and cooling fluid tanks. Visual and Electrical Fluid Level Indicators are suitable for service in mineral oil based hydraulic fluids. For Water Glycols and High Water based fluids, the sight tube must be ordered in glass construction. Fluid Level Indicators can be supplied with various types of thermometers: Built-in Tube (FSA only), Dial Gauge with Thermometer Probe or Electrical Thermo-switch.
Features- Attractive appearance
- Transparent Polyamide sight tube
- Thermometers furnished with dual range for both Celsius and Fahrenheit
- Simple and rugged construction
- Available in several sizes
- Choice of seals
- Easy mounting
- Available with Thermo-Switch
For more detailed information view the HYDAC Fluid Level Indicators page from the Womack 365 Product Catalog.
DIN 3015 ClampsHRL Series
Standard Duty
- Available to 2'' tube outside diameter
- Recommended for systems with less than 1500 PSI operating pressure and no dynamic loads
HRS Series
Heavy Duty
- Available to 16'' nominal pipe size
- Recommended for systems with greater than 1500 PSI operating pressure, operations with pressure surges and applications with wide temperature fluctuations
HRZ Series
Twin
- Available to 1¼'' nominal pipe size
- Recommended for systems with less than 1500 PSI operating pressure and no dynamic loads
HREL Series
Standard Duty with Rubber Insert
- Available to 2'' tube outside diameter
- Recommended for systems with less than 1500 PSI operating pressure and no dynamic loads
- Provide for greater noise reduction and resistance to axial movement
HRES Series
Heavy Duty with Rubber Insert
- Heavy duty available to 5¼'' bore diameter
- Provide for greater noise reduction and resistance to axial movement
For more detailed information view the HYDAC Clamps pages from the Womack 365 Product Catalog.
 Connection Flanges for SAE Port PadsPipe Thread Flanges for SAE Ports
Four-bolt connection flanges for pumps, valves, hydraulic motors and other components. Connects dryseal NPTF pipe threads, through an O-ring seal, to a standard SAE 4-bolt mounting surface per SAE J518 specs. Nominal size rating in chart indicates both NPTF size and hole diameter.
6000 PSI Pipe Thread Flanges for SAE Ports
Steel flanges pressure rated per SAE J518 Code 61 in all sizes. Connects dryseal NPTF threads to standard SAE 4-bolt pads on pumps, motors, valves and other components.
Straight Thread Flanges for SAE Ports
Steel flanges pressure rated per SAE J518 Code 61. Connects SAE straight threads to standard SAE 4-bolt pads on pumps, motors, valves, and other components.
6000 PSI Straight Thread Flanges for SAE Ports
Steel flanges pressure rated per SAE J518 Code 62. Connects SAE straight threads to standard SAE 4-bolt pads on pumps, motors, valves, and other components.
Flat Socket-Pipe Flanges for SAE Ports
Steel flanges pressure rated per SAE J518 Code 61. Connects pipe via a weldable connection to standard SAE 4-bolt pads on pumps, motors, valves, and other components.
6000 PSI Flat Socket-Pipe Flanges for SAE Ports
Steel flanges pressure rated per SAE J518 Code 62. Connects pipe via a weldable connection to standard SAE 4-bolt pads on pumps, motors, valves, and other components.For more detailed information view the Anchor Fluid Power Connection Flanges pages from the Womack 365 Product Catalog.
  Lead Screw Tapping Unit
For Production Lead Screw Tapping or
Threading with Dies
Jiffy-Tap – What is It …Jiffy-Tap is the light, compact, and powerful answer to production lead screw tapping in close quarters. The hydraulic motor on the Jiffy-Tap has up to 6 HP capability, allowing it to drive taps up to 1 1/2'' N.C. in cast iron or the equivalent. Yet the Jiffy-Tap is so compact that several of them may be mounted side by side on 3 5/16'' spacing. Length from end of tap chuck to end of hydraulic motor is less than 20''.
Jiffy-Tap consists of a lead screw spindle driven with a hydraulic motor. Built-in limit switches can be wired into an electrical circuit to reverse the motor when tapping depth is reached, and to stop it at desired retracted position. A choice of several hydraulic motors with different displacements are available, giving different ratios of speed and torque to suit every tapping application within its power range.
The Jiffy-Tap hydraulic motor receives power through a pair of hoses from a hydraulic power unit located elsewhere. This power unit is not part of the Jiffy-Tap. It may be purchased separately, or the Jiffy-Tap may be run from an existing hydraulic supply. A 4-way solenoid control valve is also required as auxiliary equipment. Full details are given in factory catalog JCAT2, available on request, or online at www.aaaproducts.com.
Jiffy-Tap Features …- Choice of lead screws from 6 to 40 threads per inch Class 3 thread. The lead screw can • be changed in the field to another pitch in less than 10 minutes by changing the lead screw spindle and its matching bushing.
- Jiffy-Tap allows the use of smaller diameter rotary tables and shorter linear movement when building transfer type machines. This allows more tapped holes per workpiece, and more tapping stations in a given space.
- Tap torque can be adjusted with the relief valve on the remote hydraulic power unit which • furnishes power for the Jiffy-Tap motor. The tap can be stalled without damage to the Jiffy-Tap or to the hydraulic power unit.
- Jiffy-Tap unit weighs approximately 28 lbs., and can be readily moved from one machine to another because of the 5/8? line-up slot in the base. If hydraulic quick couplers, and the optional electrical plug-in harness are used, the Jiffy-Tap units can be relocated very rapidly.
- Jiffy-Tap can be used as a portable tapping unit with a slide-in fixture for large parts. They can be mounted in any position.
- Jiffy-Tap can be reversed many times a minute without damage, and there is no need for special high reversal electric motors with their high inertia and high heat problems.
- A Jiffy-Tap unit, complete with any standard lead screw, electric control box, and hydraulic power unit (including reservoir and control valve), costs less than heavy, bulky electric motor driven lead screw tapping units; and the Jiffy-Tap unit (only) fits in one-third the space. With Jiffy-Tap you can now do jobs which were impractical or impossible before.
Jiffy-Tap – How It Works
Basic Tapping Unit … The unique Jiffy-Tap spindle is rotated by a compact, high torque, low inertia hydraulic motor. Reversals of 100 times a minute, and more, by means of a solenoid 4-way valve are no problem for the Jiffy-Tap.Hydraulic Power Supply … A power unit can be purchased from listings in this manual, or the Jiffy-Tap can be run from an existing power unit. A double solenoid, 4-way valve may also be purchased from listings in this manual and installed on the hydraulic power unit.Tapping Cycle … The tapping cycle is started with an electrical signal to one solenoid of a 4-way control valve. This signal may originate from a pushbutton, or from a sequence switch on an automatic machine installation. A limit switch mounted in the Jiffy-Tap provides a signal for reversal when proper depth has been reached. Another built-in limit switch stops the tap when retracted position has been reached. These stop and retract positions are adjustable.
Options …
EP-12. 8-pin male plug mounted on Jiffy-Tap unit and wired to limit switches. Also includes 12-ft. cable with 8-pin female socket to plug into Jiffy-Tap.
LS. Extra lead screw tap spindle with matching bronze bushed front bearing block. Specify desired thread when ordering.
SQ. Quick-change lead screw spindle on any basic Jiffy-Tap.
MQ. Basic Jiffy-Tap ordered with motor for Quick-change motor assembly option.
Accessories …The following accessories are available and may be purchased separately in the sizes and quantities desired.
Tap Chuck. You will need at least one chuck, either No. 1, No. 2, No. 3, or No. 4 size according to the tap size to be used. Refer to charts below.
Tap Adaptor Bushings. Order as many as desired, one for each tap size. Specify whether for No. 1, No. 2, or No. 4 chuck, and bushing I.D.
Adaptor Bushings. These charts show available sizes to fit No. 1, No. 2, and No. 4 chucks. One bushing is required for each tap size.For more detailed information view the AAA Products International Jiffy Tap pages from the Womack 365 Product Catalog.
 Production Drilling Unit
- Compact – 27'' Long.
- Lightweight – Approximately 30 Lbs.
- For Drilling, Reaming, Spot Facing and Tapping.
- Drills up to 1 1/2''
- Diameter in Cast Iron
- 6 HP Hydraulic Motor
General Description …Jiffy-Drill is the light powerful, and compact answer to production drilling, reaming, spot facing, and for tapping Class 1 or Class 2 threads in pre-drilled holes. It will drill holes up through 1 1/2" diameter to a depth of 3 1/2" in cast iron with ample allowance for dull drill bits.
A hydraulic motor rotates the spindle and will deliver up to 6 HP. Yet the Jiffy-Drill is so compact that two units can be mounted side-by-side on
3 5/16" spacing.
The Jiffy-Drill is very compact, with an approximate length of 27'' from end of hydraulic motor to end of drill chuck.
How It Works …The spindle is rotated with a slow speed hydraulic motor; the drill bit is advanced and retracted by a built-in piston which can be powered by hydraulics.
Built-in electric limit switches and cams are easily adjusted for stroke limits, forward and reverse, and for rapid advance, fine feed, and rapid retract when used with properly designed electrical and fluid circuits.
Jiffy-Drill Features …- Adjustable stroke up to 3 1/2".
- Speed range 30 to 5000 RPM according to hydraulic motor selected.
- Light weight – approximately 30 lbs. Can be used in special fixtures as a portable drill.
- Can be set up, with proper electrical circuits, for rapid advance, feed, rapid return, and to dwell, skip drill, or peck drill.
- All popular types of spindles are available.
- Jiffy-Drill can be operated at a high cycle rate or can be stalled in the work without damage to the hydraulic motor or the Jiffy-Drill.
Options …SBA-1. Basic unit can be furnished with a straight 1'' keyed drive shaft on rear of unit for quill rotation from an external power source through a pulley or flexible coupling.
EPD-12. For quick disconnect of Jiffy-Drill from external wiring. Includes all wiring, inside the Jiffy-Drill switch cover, to the limit switches and to machine ground, terminating in an 8-pin male socket mounted behind the switch cover. Also includes a 12-ft. length of 8-wire oil-resistant control cable with 8-pin mating female plug.For more detailed information view the AAA Products International Jiffy Drill page from the Womack 365 Product Catalog.
“Handy-Thread”
High Speed Threading Machine
(Cutting or Rolling)
A new concept in rod threading. Handy-Thread features standard rotating die heads, automatic air chucking, automatic die opening at precise thread length. Will cut a different thread length on opposite ends of each rod.
Designed for continuous duty high production rod threading of rods from 1/16'' through 5/8'' diameter. Approximate size: 23'' x 37' x 26'' high. Weighs approximately 300 lbs.
Handy-Thread – How It Works …The Handy-Thread has no chucking or feed levers, no foot switches and no clutches. The operator inserts the rod to be threaded through a short collet and against a stop; then pushes the carriage (with rod) forward until the rod engages the rotating threading die. At the proper thread length the die opens automatically. The operator then pulls the carriage (and rod) back and withdraws the threaded rod. Clamping and unclamping of the rod in the collet, and opening and re-cocking of the threading die are all done automatically as carriage movement actuates various limit switches.
Features of the Standard HT-1P ModelThe standard HT-1P model uses a 1 1/2 HP, single phase, 120 VAC electric motor. It rotates the threading die at 400 RPM. Other speeds can be set at the factory, as ordered, or the pulleys can be changed in the field for faster or slower spindle speed.
Rod Material. Most materials for which the die is suited can be threaded, HP and RPM being the limiting factor.
Thread Length. This model will produce thread lengths up to 6'' and can thread to within 1/2'' of the end of the rod (a minimum of 1/2'' is required for the collet to grip the rod). Rods as short as 1'' long can be threaded. Longer threads or continuous threading of long rods requires a special Handy-Thread model.
Alternate Threading. Two thread length limit cams are provided which can be set to different thread lengths. The operator can cut threads of different lengths on opposite ends of the same rod, up to 3 1/2'' long on one end and up to 6'' long on the opposite end. First thread one end, then insert the opposite end for a different thread length. After initially setting the two length stops the alternate threading operation is automatic. When the alternate threading feature is off, the same length is cut on both ends.
Thread Cutting Dies. The Handy-Thread machine can be ordered to use almost any brand of 5/8'' capacity rotating die head of the quick opening type, but the machine must be fitted at the factory for the particular brand requested.
The Handy-Thread machine can be adjusted for very accurate thread lengths, and will repeat to an accuracy of plus or minus 0.018''. The collet can be centered on the die head with sufficient accuracy to produce any class of thread of which the die head is capable. Thread length is held very accurately because of the low friction, free traveling ball bearings on which the chuck carriage travels.
Threading dies for the Handy-Thread machine must be of the quick opening, rotating type which have a yoke to open and close the die. Purchase dies locally.For more detailed information view the AAA Products International Handy-Thread page from the Womack 365 Product Catalog.
 Manufacturer of industrial automation products
Established in 1945
Secondary machining operation specialist
Hypneumat products:
- Pneumatic and hydraulic feed drilling units.
- Lead screw and air tapping units.
- Pneumatic and electrical controls.
- Basic machines
Commander products:
- U-joint multi-spindle heads.
- All geared adjustable multi-spindle heads
Snow products:
- Clutch tapping attachments
- Vises, loaders and fixtures
- Drilling and tapping machines
- Replacement parts
Euroma products:
- Pneumatic, hydraulic and ball screw feed slides
- Motorized spindles
- Rotary indexing tables
- Special slide and spindle assemblies
For more detailed information view the HYPNEUMAT Drilling Tapping page or the HYPNEUMAT Snow & Euroma page from the Womack 365 Product Catalog.
 Single and double reduction planetary gear drives to be used with electric, hydraulic, air motors or mechanical power input from high speed, low torque sources to deliver reduced speeds at increased torques. The input side has standard SAE pads for motor mounting. Available in the three output configurations shown below. Many units can be furnished with an integral parking brake.
Single reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input speed is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Units provide 95% power transmission efficiency.
Input side has standard SAE pads and splined input. Output side has hub for mounting vehicle wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is standard on all wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined input. Output side has a flanged spindle for coupling to the load.
Swing Drives
Auburn Gear’s new “SW” model 6 is offered with or without integral parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and heat treated ring gear to minimize backlash growth caused by wear. The external bearing nut provides the ultimate in shaft retention and shaft strength. Output can be a spindle shaft or various sizes of integral pinion gears.
Kit Assemblies
When a complete Power Wheel™ will not fit your application, Auburn Gear can provide part of a unit. Virtually all Power Wheel™ models are available in customized “kits” made up to your specifications, containing only those Power Wheel™ components necessary for your specific application. Typical uses of “kits” include winches, hoists, mixers, swing drives and wheel drives.
Integral Parking Brakes
Because the integral parking brake is part of the cover or spindle of the Power Wheel™ a very short compact unit is provided. The spring applied pressure released parking brake disks run in oil. They are available with the following torques to match up with the ratio you are using.
For more detailed information view the Auburn Gear pages from the Womack 365 Product Catalog.
All MICO Multiple Disc Brakes are spring loaded and hydraulically released. Chrome silicon die springs automatically apply the brake’s disc pack when hydraulic pressure drops. High strength ductile iron construction with case seals keep outside contaminates from entering the brake. Shafts are typically constructed of heat-treated 8620 steel. Brakes are available in SAE A, B, C, or D mounts with torque ranges from 136 to 2825 N-m (1200 to 25,000 lb-in) and release pressures from 6.9 to 34.5 bar (100 to 500 PSI).
Typical applications include manlifts, scissor lifts, winches, swing booms, and other low-speed vehicles and equipment.
A-Mount Multiple Disc Brake
(modular design)
Torque ratings range from 203 to 1017 N-m (1800 to 9000 lb-in). Low release pressures make this brake ideal for use with closed loop hydrostatic systems.
B-Mount Multiple Disc Brake
(narrow design)
This is an extremely compact design for length. Torque ratings range from 113 to 542 N-m (1000 to 4800 lb-in). Some models available with an optional pressure override feature for limited service braking.
C-Mount Multiple Disc Brake
(modular design)
Low release pressures make this brake ideal for use with closed loop hydrostatic systems. Torque ratings range from 509 to 1356 N-m (4500 to 12,000 lb-in). Numerous mounting configurations are available.
D-Mount Multiple Disc Brake
(modular design)
Simple four-bolt mounting configurations with models available for oil cooled or dry design applications. Torque ratings range from 621 to 2712 N-m (5500 to 24,000 lb-in). Low release pressures make this brake ideal for use with closed loop hydrostatic systems.
Compact Wheel Mount
Multiple Disc Brake
(motor input)
This is a wet design brake with pressure override option. Brake was designed for standard SAE hydraulic motor inputs and direct mounting of wheel hub to brake. Parking torque rating to 475 N-m (4200 lb-in).
Compact Wheel Mount
Multiple Disc Brake
(closed input)
Integral hub allows for direct mounting of wheel to brake. This brake has a high radial loading capacity, which makes it ideal for vehicles such as scissor lifts. Brake torques up to 1130 N-m (10,000 lb-in).
Large Wheel Mount
Multiple Disc Brake
(motor input)
This brake provides for direct mounting of wheel to brake. Designs exist for Eaton 2000 and 4000 bearingless motors.
Driveline
Multiple Disc Brake
This driveline multiple disc brake is a wet design with tapered roller bearings for high radial and thrust loads. It was developed to retrofit competitive drum/caliper driveline parking brakes. This brake also has a lining wear indicator port. Holding torques up to 2825 N-m (25,000 lb-in).For more detailed information view the MICO Multiple-Disc Brakes pages from the Womack 365 Product Catalog.
MICO Caliper Disc Brakes are either a floating or fixed caliper design. Most brakes are available as brake fluid or mineral base hydraulic oil models. There are three series of MICO Caliper Disc Brakes.
515 Series Calipers are floating type calipers. They mount over a rotor disc with either pins or shoulder bolts. One side of the caliper is stationary, while the other is actuated to provide clamping force.
520 Series Calipers are mounted stationary (or “fixed”) over a rotor disc. They use a modulated hydraulic pressure source to apply the brakes. Each side of the caliper actuates to provide clamping force.
530 Series Calipers are floating type calipers that use belleville springs to apply the brake and hydraulic pressure to release it. There are also models available that are hydraulic apply with spring release. One side of these calipers is stationary while the other is actuated to provide clamping force.
MICO Caliper Disc Brakes are ideal for providing emergency and secondary braking for applications in the agricultural, construction, mining, and forestry industries.
  
Spring Apply
(515 Series)
Belleville springs apply this brake and hydraulic pressure releases it. Used with 5/16 to 1/2 inch thick rotor disc of 6 inch diameter or larger.
Mechanical Apply
(515 Series)
Mechanical lever and cam system applies and releases this brake. Uses a 5/16 to 1/2 inch thick rotor disc of 6 inch diameter or larger.
Hydraulic Apply
(515 Series)
Modulated hydraulic pressure applies and releases this brake. Uses a 3/8 to 1/2 inch thick rotor disc of 6 inch diameter or larger.
Hydraulic Apply
(520 Series)
Has 2? inch diameter opposing pistons. Uses a 1/2 inch thick rotor disc of 9 to 36 inch diameter.
Hydraulic Apply
(520 Series)
Has 2½ inch diameter opposing pistons. Uses a rotor disc of 9 inch to unlimited diameter. Can be used with straight rail to provide full lining to surface contact.
Hydraulic Apply
(520 Series)
Lightweight aluminum housing with 2½ inch diameter opposing pistons. Uses 1/2 inch thick rotor disc of 10 to 24 inch diameter. Mounts flush with torque member. Large surface area linings can be replaced without separating housing halves.
Hydraulic Apply
(520 Series)
A split caliper with 3½ inch diameter opposing pistons. Standard 1/2 inch thick spacer can be replaced to allow for desired rotor disc thicknesses with diameters of 12 to 36 inches. Large surface area linings can be replaced without separating housing halves.
Spring Apply
(530 Series)
Belleville springs apply this type brake and hydraulic pressure releases it. Uses a 5/16 to 1/2 inch thick rotor disc of 9 inch diameter or larger.
NOTE: Not all MICO Caliper Disc Brakes are shown or discussed here. There are other designs and options available.
For more detailed information view the MICO Caliper Disc Brakes pages from the Womack 365 Product Catalog.
MICO hydraulic brake valves and brake cylinders were designed and built primarily for heavy-duty off-road vehicles and equipment. Some possible applications these components would be found on include wheel loaders, haul trucks, road graders, scrapers, rough terrain forklifts, backhoe loaders, log skidders, and forwarders.   Modulating Brake Valves
MICO modulating hydraulic power brake valves provide directional control of brake system pressure. They also provide the operator with a “pedal feel” proportional to brake system pressure.
These valves were designed for use on vehicles that are equipped with other hydraulic power devices. This feature eliminates the need for a separate power brake unit or separate hydraulic fluid system.
There are single valves for single brake systems, tandem valves for split brake systems, valves with pilot sections, and reverse modulating valves.
Modulating valves can be operated by pedal, lever, treadle, cam, pilot pressure, and electromechanical devices.  Accumulator Charge Valves
MICO accumulator charge valves control the oil supply to an accumulator from a hydraulic circuit. This is accomplished using preset charging limits and flow rate (GPM).
There are accumulator charge valves for use in single brake systems, dual brake systems, and load sensing systems. MICO also has a charge valve with a built in relief valve to control the main hydraulic system pressure.For more detailed information view the MICO Modulating Brake Valves & Accumulator Charge Valves page from the Womack 365 Product Catalog.
Hydraulic Master Cylinders
Master Cylinders are single piston, straight-bore type cylinders with a return spring. There are models with or without an integral reservoir. Cylinders are available as brake fluid or mineral base hydraulic oil models and come in a variety of mounting styles.
Two-stage MICO master cylinders are integrally designed to incorporate the advantage of a large piston for fluid volume and a small piston for high pressure. Transfer from the volume piston to the pressure piston is accomplished by means of a metered pressure relief valve.
NOTE: Not all MICO brake valves or brake cylinders are shown or discussed here. There are many more designs and options available.For more detailed information view the MICO Hydraulic Master Cylinders page from the Womack 365 Product Catalog.
 2 and 4 Section Gear Type
1.2 GPM • To 3000 PSI Continuous
Rotary type flow dividers listed on this page have two or four sections with equal displacement. Their purpose is to split the oil from a pump into two or four equal streams for independent operation of several branch circuits from one pump. They may be used either in the pump line ahead of the branch circuit 4-way valves, or may be installed following a 4-way valve for keeping several cylinders in synchronization.
Haldex can furnish rotary flow dividers with three sections or having different displacements in each section giving unequal division of flow.
Model Selection
Choice of straight threads (standard) or NPTF threads (optional). A relief valve is built into each outlet port and adjusted for 750 PSI differential (between sections).
Precautions on Use of Rotary Flow Dividers
Rotary dividers act quite differently than spool-type dividers. They are more efficient when operated in the middle of the recommended flow range, and generate less heat on those applications where branch circuits must operate at different pressure levels, or where each branch remains loaded for a different length of time on each cycle. One branch can be unloaded without generating heat while other branches remain working. When one outlet is unloaded, the torque in that section transfers through the internal shaft to working sections and could cause spiking (pressure intensification) in the working branches. To prevent this, a relief valve should be installed in each section outlet and adjusted to a safe maximum level.For more detailed information view the Haldex Rotary Type Flow Divider page from the Womack 365 Product Catalog.
 FD Series
FEATURES
- 3,000 psi maximum pressure
- 2,500 psi maximum pressure differential between outputs
White Drive Products flow dividers represent an ingenious use of the patented Roller Stator® gerotor assembly. These highly effective devices use a common housing to supply the input flow to two gerotor assemblies linked by a common drive link. By linking the two gerotor assemblies together, accurate splitting of the flow is assured. These flow dividers use no bearings or rotating seals, eliminating the typical failures in other designs. By using the highly efficient Roller Stator® gerotor elements, high efficiencies are maintained, even at low flows. Because White Drive Products flow dividers work at much lower RPMs than most gear dividers, they are noticeably quieter. These flow dividers are an excellent way to synchronize cylinders or motors. Because they tolerate higher output pressure differentials than other designs, they may also be used for pressure intensification by connecting one output to tank.
Caution: Flow dividers are not available with internal relief protection. In-line relief protection for the output lines should be provided due to the possibility of encountering pressure intensification if pressure in one outlet line drops dramatically.For more detailed information view the White Drive Products Flow Divider page from the Womack 365 Product Catalog.
 Enidine Air Springs are highly durable, precisely engineered and cost-effective for use in a variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Wingprene™ or Natural Rubber flex member construction, and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance.
As an actuator, Enidine Air Springs provide linear or angular motion. These Air Springs offer a favorable stroke-to-compressed-height ratio when compared to air cylinders, and can accept a wide variety of actuation media such as air, water, nitrogen or anti-freeze.
As an isolator, Enidine Air Springs are effective in reducing the harmful effects of vibration. They can simultaneously isolate vibration and regulate load height, as well as allow for consistent vibration isolation under varying loads.
Enidine offers a variety of Air Spring types to meet your actuation or isolation needs. The Single, Double and Triple Convolute Bellows, Rolling Lobe and Sleeve Types are available in a wide range of sizes, with the End Retainer Style required for your installation.
Applications for Platinum Series Shock Absorbers
- Scissor lifts
- Injection or ejection of parts in manufacturing equipment
- Vertical lift force for platforms and rotating tables
- Conveyor or transfer systems
- Rotary shaft actuators
- Presses
- Bin-tilting devices
- Palletizers, label applicators in packaging equipment
- Amusement park rides
- Clutch and brake systems
Typical Vibration Isolation Applications for Air Springs
- Textile looms
- Conveyor loading points
- Compressors
- Electronic equipment
- Vibratory conveyors
- Large drying machines
- Centrifugal separators
- Coordinate measuring tables and machinery
- Commercial laundry machines
For more detailed information view the ITT Enidine Air Springs pages from the Womack 365 Product Catalog.
Enidine Wire Rope Isolators for Shock and Vibration
Enidine, a preferred source for energy absorption and vibration isolation solutions, offers a full range of standard and custom Wire Rope Isolator products, each designed to reduce the harmful effects of shock and vibration.
Wire Rope Isolators are comprised of stainless steel stranded cable, threaded through aluminum alloy retaining bars, crimped and mounted for effective vibration isolation. With their corrosion resistant, all-metal construction, Enidine Wire Rope Isolators are environmentally stable, high-performance shock and vibration isolators that are unaffected by temperature extremes, chemicals, oils, ozone and abrasives.
Featuring a patented crimping pattern, versatile mounting options and a variety of sizes, these helical isolator products can help ensure that your systems can effectively meet performance requirements in commercial, industrial, and defense industries, including MIL-STD-810, MIL-STD-167, MIL-S-901, MIL-E-5400, STANAG-042, BV43-44 and DEF-STND 0755.
Typical Wire Rope Isolator Applications
- Electronic Enclosures
- Medi-Vac Equipment
- Mobile Electronic Equipment
- Power Units
- Radar Systems
Other Applications
- Avionics
- Carts, Transporters and Gurneys
- Chemical Processing Equipment
- Chimneys, Scrubbers and Vessels
- Electronic Cabinets
- Military Equipment
- Navigation Equipment
- Over-the-road Transport
- Power Plant Piping Suspension
- Pump, Generator and Compressor Isolation
- Seismic Isolation
- Shipboard Electronics
- Shipping Cases, Skids and Containers
- Transportable Shelters
For more detailed information view the ITT Enidine Wire Rope Isolators pages from the Womack 365 Product Catalog.
Enidine Compact Wire Rope Isolators
for Shock and Vibration
 For the best in vibration isolation capabilities, choose Enidine Compact Wire Rope Isolators. Smaller than traditional wire ropes, these unique isolators provide cost-effective, simultaneous shock and vibration attenuation where package space is at a premium.
Enidine Compact Wire Rope Isolators feature an easy, single-point installation, which allows them to be installed in virtually any application. Their small size also permits the isolation of individual system components, making them ideal for use in sensitive equipment and electronics. Just as with our standard Enidine Wire Rope Isolators, Enidine Compact Wire Rope Isolators feature a patented, all-metal design and components that ensure maximum reliability, regardless of temperature or substrate requirements, and that can help meet MILSPECS similar to those of our Wire Rope Isolator series.
If your application is outside the standard Compact Wire Rope Isolator product range, Enidine engineers can design an isolator to suit your specifications.
Typical Compact Wire Rope Isolator Applications
- CD-ROM Drives
- Laboratory Centrifuges
- Computer Hardware
- Medical
- Ventilators
Other Applications
- Audio/Visual Equipment
- Avionics
- Catering Carts
- Communications Packages
- Medical Devices
- Sensitive Electronic Equipment
For more detailed information view the ITT Enidine Compact Wire Rope Isolators pages from the Womack 365 Product Catalog.
Enidine Heavy Industry (HI Series) Buffers
Enidine Heavy Industry (HI Series) Buffers safely protect heavy machinery and equipment during the transfer of materials and movement of products. The large-bore, high-capacity buffers are individually designed to decelerate moving loads under various conditions and in compliance with industry mandated safety standards. Control of bridge cranes, trolley platforms, large container transfer and transportation safety stops are typical installation examples. Industry-proven design technologies, coupled with the experience of a globally installed product base, ensure deliverable performance that exceeds customer expectations.
Features:
- Decelerates at impact speeds of 0.15 m/sec up to 5m/sec. (6 in./sec. to 200 in./sec.
- Temperature range of -20ºC to + 0ºC (80ºF to 175ºF)
- Surface treatment (Sea water resistant)
- Housing: gray color – three-part epoxy Piston Rod: hard-chrome plated steel
Optional Accessories:
- Protective bellows, Safety cables and Lugs
- All models are custom orificed • for application specific requirements.
- Engineered to meet OSHA, • AISE, CMAA and other safety specifications such as DIN and FEM
- Additional characteristics of the Enidine HI Series include a nitrogen-charged return system that allows for soft deceleration and positive return in a maintenance-free package. The oversize bore area results in optimal energy absorption capabilities and increased internal safety factors. State-of-the-art testing facilities ensure integrity of design and product performance.
Typical Heavy Industry (HI Series) Buffer Applications
- Steel Mills
- Foundries
- Container Cranes
- Harbor Cranes
For more detailed information view the ITT Enidine HI Series Buffers pages from the Womack 365 Product Catalog.
Enidine Platinum Series Shock Absorbers The Enidine Platinum Series shock absorbers, available in both adjustable and non-adjustable models, offer even greater performance and lower maintenance than standard Enidine shock absorbers. Combining a corrosion-resistant, nickel-plated finish with upgraded energy capacities, the Platinum Series provides:
- Up to 25% higher energy capacities than traditional shock absorbers.
- Positive repeatable stop positioning capabilities.
- Drop-in replacement for existing Enidine shock absorbers, allowing greater capacities in the same dimensional envelope.
- Unparalleled performance in areas of high humidity, harsh chemicals and frequent washdowns.
- Ideal for use in medical, clean room and food grade applications, or where traditional shock absorbers are typically not specified.
- Aesthetically pleasing appearance for today’s OEM equipment design standards.
- Competitively priced and readily available.
As with all products, the Enidine Platinum Series shock absorber is accompanied by full engineering support, allowing for a custom solution to meet even the most challenging shock absorber applications.
Applications for Platinum Series Shock Absorbers
Air Cylinder
Special OEM Series shock absorber installed on a trunion mounted, thru-rod pneumatic cylinder, absorbs the energy created from this drive actuator, which controls the seal and cut operation on a vertical form, fill seal and packaging machine.
Packaging Machinery
PRO Series shock absorbers control rapid movement of a table transporting loaded packages to an automated case packer sealing station, for safe and precise machinery operation.
CAT Scan Equipment
OEM Models assist with deceleration and protection of the delicate CAT scan camera during start/stop patient scanning procedures.
Rolling Door
As automatic rolling doors open and close, OEM Models are used for linear deceleration to decrease noise, protect precision mechanical components and prolong door life.
Rodless Cylinders
PRO Series shock absorbers permit higher rod cylinder loads/ velocities, as well as increased operational life by providing smooth, even deceleration.
Machine Tools
PM shock absorbers installed on a vertical CNC tool changer allow rapid tool changing by controlling rotational motion, vibration and impact noise of the spindle.
For more detailed information view the ITT Enidine Platinum Series Shock Absorbers pages from the Womack 365 Product Catalog.
Enidine Heavy Duty (HD/HDA) Series Shock Absorbers Enidine Heavy Duty (HD/HDA) Series large-bore hydraulic shock absorbers protect equipment from large impacts in applications such as automated storage and retrieval systems, as well as overhead bridge and trolley cranes.
The heavy-duty series’ unique air-charged bladder/accumulator system eliminates a coil spring needed for piston rod return, creating a short overall length-to-stroke ratio. This allows design engineers to fit the HD or HDA unit into smaller areas. Bore dimensions of up to 6 inches (150mm) and strokes of over 60 inches (1,525mm) are standard, with special sizes available upon request. Other options include:
- Configurations, including bellows, clevis mounts and safety cables.
- Adjustable units for applications requiring varying dampening rates.
- Piston rod extension sensor systems for re-use safety requirements.
- Epoxy painting and special rod materials for use in highly corrosive environments.
Units are engineered to meet OSHA, AISE, CMMA and other safety specifications and are fully field repairable.
For more detailed information view the ITT Enidine Heavy Duty Shock Absorbers page from the Womack 365 Product Catalog.
 Air Blasters
- Standard, High Temp or Nitrogen Air Blasters
- The most powerful blast in the industry
- Restore flow in toughest applications
- Featuring Global’s patented Quick Exhaust Valve
- 100% Sealed – No air leakage
- No lubrication required
- Nitrogen Blasters for combustible environments
- Stainless Steel models available
Electric Vibrators – Quiet Thunder®
- Single or Three Phase 115V – 575V
- 12V and 24V DC models available
- 50Hz and 60Hz
- Shock resistant epoxy-coated windings
- High capacity bearings
- Adjustable Weights
- Extremely Quiet
High Frequency Roller Vibrators
- Air driven
- Permanent or Cradle Lug mount
- No bearings or motors
- High Frequency – High Force
- Ideal for Railcar unloading
- Chromed sideplates and hardened shafts
- Use brackets for portability
Design Series Motor Driven Vibrators
- Hydraulic or Pneumatic models
- Permanent or portable mounting options
- Adjustable or fixed weights
- Unique coupling design isolates vibration from motor – extends bearing and seal life
- High force output – up to 35,000 pounds
- Effective in large load applications
Turbine Vibrators – Turbovibers®
- Durable – tolerates dirty air
- Patented Terry Turbine design
- Permanent or Cradle Lug mount
- Ideal for concrete consolidation
- Starts in any position
- No lubrication required
- Use brackets for portability
Turbine Vibrators – Silver Sonic®
- Extremely efficient – less than 5psi / less than 1CFM
- Patented Terry Turbine design
- Ideal for clean environments – food and pharmaceutical
- No lubrication required
- All-aluminum housing No Paint
- Ultra-high frequencies – up to 40,000vpm
- Mount Kits available
Ball Vibrators
- Air Driven
- No bearings or motors
- Ideal for small applications
- Rugged Construction
- Sealed for efficiency and quieter operation – mufflers available
- Repair Kits available for wear parts
Piston Vibrators Yellow Jackets® or P-Series
- Air Operated
- Air Cushioned models for quiet operation
- Direct Impact models for high force
- Use less air than most rotary vibrators
- YJ models are 50 – 70% lighter
- YJ models have protected exhaust ports
- Railcar Unloaders with wear resistant pistons
- Matchplate and Screed models available
For more detailed information view the Global Industrial Air Blasters and Vibrators pages from the Womack 365 Product Catalog.
<< Back to Hydraulics
|
|