AS65

The drive on our AS40-CD conveyors can be placed at any point on the conveyor's frame, and are ideal when integrating ends with other machinery.
Single Piece Aluminum Frame

Box Frame Construction for Rigidity

The frame is the backbone of the conveyor. A sturdy frame helps to ensure positive tracking throughout the life of the conveyor. That’s why we designed ours with a box-frame construction that resists both latitudinal and longitudinal deflections. Conveyors 18” and wider feature a rigid aluminum/steel frame.
Movable Center Drive

Slides into any position and locks in place

Center Drive can be placed at any point along the length of the conveyor — simply loosen a few screws, slide to new location and re-tighten. The drive idler pulleys are easily removed for rapid belt changes, without removing the drive. Center drives are ideal for applications where both ends of the conveyor must be clear.
Tension Release Tail

Flips up at the push of a button

Tension Release Tails flip up at the push of a button to relieve tension on the belt. This makes it easy to clean under the belt. A gentle push locks the tail back into place with tension and tracking setting retained.
V-Guide Belt Capable

Proper tracking for demanding applications

All Automation Series conveyors support optional v-guide belting, which works to keep the belt centered in applications with side loading/exiting or reversing.
Optional Nosebar Tail

Ideal for Transferring Small Products

Optional nosebar tails allow for transfers of small products between conveyors. The tighter 11mm radius of the pulley reduces the gap between pulleys.