Turbine Flow Meters (Water/Water-Based Fluids)

Turbine Meters

Turbine Meters

  • Flow ranges: 0.6 - 3.0 GPM (2.27 - 11.36 LPM) up to 500 - 5000 GPM (1893 - 18927 LPM)
  • Rugged contruction: Body: T316 Stainless steel; Rotor: T416 Stainless steel; Internal supports: Tungsten carbide; Bearings: Tungsten carbide journals; Retaining rings: T303 Stainless steel; Pick-up: Magnetic, Standard
  • Meter bore sizes from 3/8 to 10 inch
  • Ports: 1/2 to 2 inch NPT; 3 to 10 inch Victaulic® grooved ends
  • Pressure: 5,000 psi (345 bar) maximum
  • Temperature: Standard: 330 °F (165 °C) maximum; High Temp: 450 °F (232 °C) maximum
  • Accuracy within ±1% of reading
  • Standard calibration: 1.0 specific gravity for water and water-based liquids
  • Magnetic pick-up output: 30 millivolts to 3 volts - peak-to-peak

Typical Applications: 

  • Water Cooling Systems
  • Water Sprinkler Systems
  • Mobile Chemical Sprayers
  • Water Cooling - Mining
  • Irrigation - Agricultural
  • Water Flood
  • Oil Recovery

 

Electronic Readouts

Electronic Readouts

The Hedland Model HB2800 is a state-of-the-art flow monitor designed to be utilized with all Hedland HB Series turbine flow sensors. The HB2800 comes pre-calibrated by the factory when ordered with a Hedland HB Series turbine flow sensor, or the monitor may be configured in the field. The HB2800 may also be used with almost any flow sensor that outputs a low-amplitude AC signal.

Features Include:

  • Microprocessor-based
  • Battery (1.5 VDC) or loop-powered (4-20 mA) versions
  • Extra large rate and total display
  • Meter, remote, panel, or swivel mount options
  • NEMA 4X/CSA Type 4 enclosure
  • Intrinsically safe
  • Explosion-proof model available

 

Electronic Accessories

Electronic Accessories

F-I Analog Transmitter

  • Converts frequency outputs to 4-20 mA output
  • Cannister or condulet models available

F-V Analog Voltage Transmitter

  • Converts frequency outputs to 0-5 Vdc output
  • Cannister or condulet models available
  • Requires 10-30 Vdc power supply

K-factor Scaler

  • Scales turbine meter output to desired engineering unit
  • Amplifies turbine meter pulse output
  • Converts frequency outputs into recognizable units for PLCs and other devices
  • NEMA 4X enclosure
  • Requires 8.5-30 Vdc power supply

Cables

  • Standard 10 foot cables
  • Variety of connectors