Installation Kits and Accessories include all of the necessary components for straight or tee splices, power connection boxes, and water-resistant endseal terminations for heat tracing systems. Installation tape, pipe straps, and caution labels are available from our Econo or Duro line accessories.

Snow / Ice Controls 

snow ice controls.jpg

Chromalox Snow Melting Systems are used to keep walkways, entrance ways, parking garage ramps, loading ramps, stairways and other areas free of snow and ice.  These electric snow melting systems reduce snow removal costs, help to avoid slip and fall accidents, and help prevent damage to expensive flooring caused by tracked in sand, salt or other chemicals used to melt ice. Chromalox utilizes mineral insulated heating cable with a rugged, chemical resistance Alloy 825 sheath. Watt densities to 50 watts per foot are available in voltages from 120 to 480 volts. Chromalox carries a complete line of snow melting controls and sensors from single point on/off snow switches to multi point distributed systems. Controls are designed to simplify and economize system operation.

APS-3C 

Automatic Snow/Ice Melting System Controller

  • Automatic Snow/Ice Melting Control
  • Minimum Energy Costs
  • Controls Mechanically-Held Contactors
  • Remote Control/Monitor (available option)
  • NEMA 3R Enclosure
  • UL Listed
  • Adjustable Heater Hold-On Timer
  • Heater Cycle Push Button
  • Multiple Sensor Capability

APS-4C 

Automatic Snow/Ice Melting System Controller

  • Multiple Sensor Capability
  • Remote Control Option
  • Controls Up to 10 Satellite Contactors
  • Timed Heater Cycle Capability
  • UL Listed, CSA Certified
  • Single and Three-Phase Power Control
  • Supply Options: 208, 240, 277, and 480 Volts
  • 30 mA Ground Fault Circuit Interrupter with Test/Reset
  • Contactor Rating of 50 Amps Per Pole
  • Simple Installation


LCD-1 

Snow Switch

  • Minimum Snow Melting Costs
  • No Supervision Required
  • Low Cost
  • Reliable Automatic Control
  • UL Listed/ CSA Certified
  • Simple Installation
  • Field Proven in Thousands of Installations
  • Integral Precipitation Sensor
  • 16 Amp 120/240 Volt Relay

 

RCU-3 

Remote Control Unit

  • Remote System Status Indication
  • Convenient Manual Control for Melting Problem Areas
  • Low Cost
  • Simple Installation


 

SC-40 

Satellite Contactor

  • Low Cost Control of Larger Snow Melting Systems
  • Contactor Rating of 50 Amps Per Pole
  • Supply Options: 208, 240, 277 and 480 Volts
  • Single and Three-Phase Power Control
  • Integral 30mA GFCI
  • UL Listed, CSA Certified
  • Self-Test Feature
  • Simple Installation
  • Low Cost 

 

Heat Trace Panels

heat trace panels.jpg

The Chromalox intelliTRACE and weatherTRACE control systems provide temperature control, monitoring, and power management in one package.  From state of the art Multiple Circuit Panels to best in class digital thermostats, Chromalox now offers a full line of industry leading Industrial Controls, Panel and Accessories to meet the most demanding Heat Trace applications. The ITLS/ITAS Panel Series is the flagship of the new fleet of products. The ITLS/ITAS Series provides 40 Amps of SSR Power switching in 6 - 72 circuits per system. It offers total process monitoring & management, either locally or remotely, including Soft start & Sensor Mapping. The easy to program and navigate 10" touch screen computer is the brains behind the new system. Our DTS, the benchmark of digital thermostats, provides a single, 30 Amp point of control that also employs a soft start feature. Both of these new lines are suitable for Class I, Division 2 environments.

FPAS

Freeze Protection Ambient Sensing Series

  • Standard NEMA 4 Enclosures
  • NEMA 4X Stainless Steel Enclosure Option
  • Hand/Off/Auto Selector Switch
  • 15, 25, 30, and 40 Amp Single-pole and Double-pole 30 mA Ground Fault Thermal-Magnetic Circuit Breakers

FPASM

Freeze Protection Ambient Sensing Monitor Series

  • Standard NEMA 4 Enclosures
  • NEMA 4X Stainless Steel Enclosure Option
  • Hand/Off/Auto Selector Switch
  • 12, 18, 20, 30, and 42 Position Panelboards 

FPLS

Freeze Protection Line Sensing Monitor Series

  • Standard NEMA 4 Enclosures
  • NEMA 4X Stainless Steel Enclosure Option
  • Hand/Off/Auto Selector Switch
  • 15, 25, 30, and 40 Amp Single-pole and Double-pole 30 mA Ground Fault Thermal-Magnetic Circuit Breakers

FPLSM 

Freeze Protection Line Sensing Monitor Series

  • Standard NEMA 4 Enclosures
  • NEMA 4X Stainless Steel Enclosure Option
  • Hand/Off/Auto Selector Switch
  • 12, 18, 20, 30, and 42 Position Panelboards

 

HTLS-1,2,3,4

Heat Tracing Line Sensing Control Panels 1-4 Loops

  • Solid State Relay Output Rated 30 Amps or Two-Pole Contactor Control Output
  • Universal Inputs
  • NEMA 4/4X Enclosure
  • Ground Fault Alarm/Trip Monitor or GFI Circuit Breakers

 

ITAS-6 to 36

Heat Tracing Ambient Sensing Control Panel

  • 10" VGA Touch Screen HMI
  • NEMA 4 Enclosure
  • SCR Control
  • Integral Circuit Panel with Circuit Breakers
  • 40 Amps/Loop @ 100 - 480 VAC
  • Optional Main Disconnect
  • Soft Start Feature
  • Full Communications
  • Enhanced Data Logging
  • Complete GFI Monitoring & Alarms
  • Load Monitoring & Alarms
  • Full Alarm Capabilities
  • Optional NEMA 4X
  • Optional Enclosure Heater
  • UL, cUL, CE, FM
  • Touch Screen Computer

ITAS-EXT

Heat Tracing Extension Panel 6 to 36 Loops - Ambient Sensing

  • NEMA 4 Enclosure
  • SCR Control
  • Integral Circuit Panel with Circuit Breakers
  • 40 Amps/Loop @ 100 - 480 VAC
  • Optional Main Disconnect
  • Soft Start Feature
  • Soft Start Feature
  • Full Communications
  • Enhanced Data Logging
  • Complete GFI Monitoring & Alarms
  • Load Monitoring & Alarms
  • Full Alarm Capabilities
  • Optional NEMA 4X
  • Optional Enclosure Heater
  • UL, cUL, CE, FM

ITLS-6 to 36

Heat Tracing Line Sensing Control Panel 6-36 Loops

  • 10" VGA Touch Screen HMI
  • Integral Circuit Panel with Circuit Breakers
  • Expandable to 72 Loops (with ITLS-EXT Extension Panels)
  • NEMA 4 Enclosure
  • SCR Control
  • 40 Amps/Loop @ 100 - 480 VAC
  • Optional Main Disconnect
  • Soft Start Feature
  • Full Communications
  • Enhanced Data Logging
  • Complete GFI Monitoring & Alarms
  • Load Monitoring & Alarms
  • Full Alarm Capabilities
  • Optional NEMA 4X
  • Optional Customizable I/O Mapping
  • Optional Enclosure Heater
  • Optional Enclosure Heater
  • cUL, UL
  • CE, FM Available
  • Touch Screen Computer

ITLS-EXT

Heat Tracing Extention Panel 6 to 36 Loops - Line Sensing

  • 10" VGA Touch Screen HMI
  • Enhanced Data Logging
  • NEMA 4 Enclosure
  • SCR Control
  • Integral Circuit Panel with Circuit Breakers
  • 40 Amps/Loop @ 100 - 480 VAC
  • Optional Main Disconnect
  • Soft Start Feature
  • Full Communications
  • Complete GFI Monitoring & Alarms
  • Load Monitoring & Alarms
  • Full Alarm Capabilities
  • Optional NEMA 4X
  • Optional Customizable I/O Mapping
  • Optional Enclosure Heater
  • UL, cUL, CE, FM
  • Applicable Feature When Paired with Matching intelliTRACE ITLS Control Panel

 

Heat Trace Thermostats

heat trace thermometers.jpg

Thermostats are used for maintaining proper viscosity and flow in heat trace or freeze protection applications.

 

B100 & E100

Heat Trace/ Freeze Protection Thermostats

  • B100 Direct Mount for Freeze Protection (Ambient)
  • ±1% Setpoint Repeatability
  • E100 Remote Mount for Heat Trace (Bulb & Capillary)
  • 22 Amp Resistive Switch
  • Single and Dual Output Models
  • Fast Response for Protection of Valves and Piping
  • NEMA 4X, 7 and 9 Enclosures

DTS-HAZ

Heat Trace Digital Thermostat

  • 30 Amp Solid State Relay (SSR) Output
  • On/Off Control - 10 degree selectable deadband
  • Soft Start Eliminating SR Cable In-Rush
  • LED Indication for Setpoint, Process Temp, High Temp Alarm, Low Temp Alarm, RTD Failure
  • Programmable High and Low Temp Alarms
  • Programmable Deadband in One Degree Increments
  • Common Alarm Contract for Remote Indication of Alarm Status
  • NEMA 4X Enclosure
  • 100 to 240 VAC Operation


PIT

Non-Idicating Temperature Controllers

  • Opens or closes a circuit on temperature rise.
  • Single pole, double throw (SPDT) snap action switch.
  • Rain-tight gasketed enclosure, Type PIT, is 0.062" steel. Simple mounting on three rubber- cushioned feet. Has adjustable high limit stop. Plain copper bulb and capillary.
  • Capillary Length 10 ft 1/16" Dia.
  • Explosion-proof cast aluminum housing approved for Class I, Group D & Class II, Groups E, F and G applications. External adjusting knob and tin-plated copper bulb and capillary.

RTAS & RTAS-EP

Ambient Sensing Integrated Temperature Controls

  • Use With: SRL, SRP, SRM/E, CWM, SRF
  • Line or Ambient Sensing Themostats
  • ElectroMechanical Control
  • Rugged, Corrosion Resistant Construction
  • NEMA 4X Design with Corrosion and Weather Resistant Ryton® Construction
  • 120 - 480 Vac
  • 0 - 225°F Temp. Rating
  • 9/16" OD x 4" SS Probe
  • Ordinary & Hazardous Area (Div. 2) Approvals

RTBC & RTBC-EP

Bulb & Capillary

  • Use With: SRL, SRP, SRM/E, CWM, SRF
  • Line or Ambient Sensing Thermostats
  • ElectroMechanical Control
  • Rugged, Corrosion Resistant Construction
  • NEMA 4X Design with Corrosion and Weather Resistant Ryton® Construction
  • 120 - 480 Vac
  • 0 - 400°F Setpoint Range
  • 1/4" OD x 7-1/4" SS Bulb and 3 Ft. Capillary
  • Ordinary & Hazardous Area (Div. 2) Approvals 

THL

Heat Trace / Freeze Protection Thermostats

  • Use With: SRL, SRM/E, CWM, SRF
  • Direct Mount for Freeze Protection (Ambient)
  • 22 Amp Resistive Switch
  • Single and Dual Output Models
  • ± 1% Setpoint Repeatability
  • Fast Response for Protection of Valves and Piping
  • NEMA 4X Enclosure


TRH

Heat Trace / Freeze Protection Thermostats 

  • Use With SRL, SRM/E, CWM, SRF
  • Remote Mount for Heat Trace (Bulb & Capillary)
  • 22 Amp Resistive Switch
  • Single and Dual Output Models
  • ± 1% Setpoint Repeatability
  • Fast Response for Protection of Valves and Piping
  • NEMA 4X Enclosure

TXL

Heat Trace / Freeze Protection Thermostats

  • Use With: SRL, SRM/E, CWM, SRF, HSRL, HSRM
  • Direct Mount for Freeze Protection
  • 22 Amp Resistive Switch
  • Single and Dual Output Models
  • ± 1% Setpoint Repeatability
  • Fast Response for Protection of Valves and Piping
  • NEMA 4X, 7, 9 Enclosures


TXR

Heat Trace / Freeze Protection Thermostats

  • Remote Mount for Heat Trace (Bulb & Capillary)
  • Use With: SRL, SRM/E, CWM, SRF, HSRL, HSRM
  • 22 Amp Resistive Switch
  • Single and Dual Output Models
  • ± 1% Setpoint Repeatability
  • Fast Response for Protection of Valves and Piping
  • NEMA 4X, 7, 9 Enclosure

 

Heat Trace Sensors

heat trace sensors.jpg

Heat-tracing temperature sensors are used to control the surface temperature of process pipe whose temperatures must be controlled to prevent freeze-up or maintain viscosity.

CIT-1

Snow Sensor

  • Reliable Snow Sensing
  • Senses Both Temperature and Precipitation
  • Application Flexibility
  • Simple Installation
  • Field Proven in Thousands of Installations

 

 

GIT-1

Gutter Ice Sensor

  • Reduces Operating Costs
  • Reliable Automatic De-Icing Control
  • Sense Both Moisture and Temperature
  • Gutter-Mounted for Accuracy
  • Avoids Ice Bridging
  • Ruggedized Housing
  • Locate Up to 2,000' (609.6m) From the Control Panel
  • Simple, Low Cost Installation
  • Field Proven Reliability

GIT-3A

Gutter Ice Melting Control

  • Automatic Gutter Ice Melting Control
  • Energy Efficient
  • Minimum Operating Costs
  • Maintains Ice Melting Heater Efficiency
  • Field Proven Reliability
  • UL and CUL Listed to Standard 873
  • Low Cost
  • Simple Installation

GIT-4

Gutter Ice Melting w/ Remote Control

  • Automatic Gutter Ice Melting Control
  • Energy Efficient
  • Minimum Operating Costs
  • Maintains Ice Melting Heater Efficiency
  • Built-In Ground Fault Equipment Protection (GFEP) for safety
  • UL and CUL Listed to Standard 873
  • Remote Monitor and Control Included
  • Low Cost
  • Simple Installation 

SIT-6E

Pavement Snow and Ice Sensor

  • Reliable Snow Sensing
  • Control Based on Pavement Conditions
  • Rugged Construction
  • Simple Installation
  • Low Voltage Construction