DC-10S
Features
- 12 VDC
- Manual Operated Power Up/Gravity Down
- This unit is for power up/hold/gravity down applications.
- In one direction the manual handle starts unit to power up.
- In the other direction, the manual handle provides gravity down.
- In the neutral position, the unit holds steady.
- The unit features an adjustable relief valve, cartridge hold & lower valves, allowing for easy field service and interchangeability.
- A pressure compensated flow control for lower function is optional.
- Can be assembled using standard Pick-A-Pack parts.
- Can be made metric by using KN10 endhead.
DC-20SF
Features
- 12 VDC
- Solenoid Operated Power up/Gravity Down
- This unit is for power up/hold/gravity down applications.
- The remote controller allows an operator to power up and gravity down the unit.
- In the off position, the unit holds steady.
- The unit features an adjustable relief valve, cartridge hold & lower valves, allowing for easy field service and interchangeability.
- A pressure compensated flow control for lower function is optional.
- Can be assembled using standard Pick-A-Pack parts.
- Can be made metric by using KN10 endhead.
DC-30SF
Features
- 12 VDC
- Check and Relief Valve Power Unit
- This unit provides flow and pressure for customer specific applications.
- The unit can be used for power up/hold/gravity down, or power up/hold/power down applications, dependent on customer-supplied valving.
- Features include an adjustable relief valve and cartridge check valve.
- Can be assembled using standard Pick-A-Pack parts.
- Can be made metric by using KN10 endhead.
DC-41DT
Features
- 12 VDC
- Solenoid Operated Power Up/Power Down
- This unit is for power up/hold/power down applications.
- The valving is in the top of the endhead, allowing easy access.
- The controller (either customer-supplied or supplied with the unit) will power the unit in both directions.
- The unit will hold load in the off position.
- Pressure compensated flow control allows smooth-running functions in both directions.
- Features include an adjustable relief valve and cartridge valves for easy service and interchangeability.
- Use the ordering guide to get the features you need.
DC-50SF
Features
- 12 VDC
- Manual Operated Power Up/Power Down
- This unit is for power up/hold/power down applications
- The manually operated directional valve powers the unit in both directions
- In the neutral position, the unit is off and holds steady
- Features include an adjustable relief valve and load-holding P.O. check valve
- Can be assembled using standard Pick-A-Pack parts
- Can be made metric by using KN10 endhead
DC-60SF
Features
- 12 VDC
- Solenoid Operated Power Up/Power Down
- This unit is for power up/hold/power down applications
- The controller allows an operator to power the unit in both directions
- In the off position, the unit holds steady
- Features include an adjustable relief valve and load-holding P.O. check valve
- Can be assembled using standard Pick-A-Pack parts
- Can be made metric by using KN10 endhead
DC-62SF
Features
- 12V DC
- Solenoid Operated Dual Power Up/Power Down
- This unit is for dual power up/hold/power down applications
- The customer-supplied controller will power the unit in both directions
- In the off position, the unit holds steady
- Directional valves run independently of each other, allowing for two separate system functions
- Features include an adjustable relief valve and load-holding P.O. check valve
- Can be assembled using standard Pick-A-Pack parts
- Can be made metric by using KN10 endhead
DC-70SF
Features
- 12V DC
- Solenoid Operated Power Up/Power Down
- This unit is for power up/hold/power down applications
- The controller allows an operator to power the unit in both directions
- In the off position, the unit holds steady
- Features include an adjustable relief valve and load-holding P.O. check valves
- A cartridge directional valve is also included for easy field service and interchangeability
- Can be assembled using standard Pick-A-Pack parts
- Can be made metric by using KN10 endhead
DC-90SF
Features
- 12V DC
- Relief Valve Only
- This unit provides flow and pressure for customer specific applications
- The unit can be used on double acting applications
- Features include an adjustable relief valve
- Can be assembled using standard Pick-A-Pack parts
- Can be made metric by using KN10 endhead
DC-20MH
Features
- 12V DC
- Material Handling Solenoid Operated Power Up/Gravity Down
- Designed for low-lift pallet trucks
- The units have a 3-way circuit for raise-hold-lower functions and are used with a single acting cylinder
- This unit is plumbed for vertical mounting and is interchangeable with other manufacturer's power packs
DC-20ML
Features
- 12V DC
- Man Lift Solenoid Operated Power Up/Gravity Down
- Designed for use on battery operated, elevated work platforms using a raise-hold and gravity-lower circuit
- Includes normally open valve to protect operators from run-on
- Manual override to allow the platform to be lowered in case of power failure
DC-24MH
Features
- 24V DC
- Material Handling Solenoid Operated Power Up/Gravity Down
- Designed for low-lift pallet trucks
- The units have a 3-way circuit for raise-hold-lower functions and are used with a single acting cylinder
- This unit is plumbed for vertical mounting and is interchangeable with other manufacturer's power packs
DC-30APU
Features
- 12V DC
- Auxiliary Power Unit Relief and Check Valve Only
- Intended to be used with remote directional control valving and reservoir
- This unit has an adjustable relief valve and outlet check valve
- For applications such as back-up hydraulic power for truck mounted/mobile equipment
- Can also be used to power material handling functions and other intermittent duty applications
DC-70BS
Features
- 12V DC
- Bale Spike Solenoid Operated Power Up/Power Down
- Designed primarily to operate tines which pick up round bales
- Incorporates a 2-position, 4-way cartridge valve and double pilot-operated checks to control a double-acting cylinder, to lift-hold-lower the bale.
DC-80SP
Features
- 12V DC
- Snow Plow Solenoid Operated Power Angle and Lift/Gravity Down
- Designed to operate all functions of a power-operated angling snow plow
- The unit includes a lift-hold-gravity lower function for the blade, with a continuous "float" capability
- A directional valve controls power angling of the blade
- 2 cross-over reliefs protect the system from damage should the blade be obstructed while plowing
Available in: Alabama, Arizona, Arkansas, N.W. Florida, S. Idaho, Kansas, Louisiana, Mississippi, W. Missouri, Montana, Nevada, New Mexico, W. North Dakota, Oklahoma, W. South Dakota, Texas, Utah and Wyoming
