Barksdale's position indicators are sensitive feedback devices that can be attached to Series II & Series III-L valves to provide valve status feedback. Using Barksdale's know-how in electric switch technologies, the position indicator senses any of the three valve positions and signals this information through an electrical contact. With a housing constructed of all stainless steel material, this product is designed for use in heavy industrial environments and in the most demanding applications. The explosion proof rating is Division I, Class I.
In applications where feedback from the valve is desirable, Barksdale's position indicator replaces such devices as proximity sensors, pressure switches and limit switches. Position indicators come already installed and calibrated on our Series II & Series III-L valves, saving installation costs for the customer.
- Fits all Series II & Series III-L valves
- 2 position and 3 position
- 30 VDC max, 500 mA (PLC compatible)
- Designed for Division I and I.S. use
- UL & ATEX approved
- NEMA 4X, IP67
|Housing Material:||Stainless steel|
|Enclosure:||NEMA 4X, IP67|
Maximum Contact Resistance:
|30 VDC max, 500 mA (carry current)
½" NPT rotating female conduit connection with 3 ft (36 in) cable
UL listing, 4 conductors, 22 AWG TPE fl ame resistant jacket.
Resistance to oils, fuels, and solvents
100 megaohms minimum(@ 250 VDC)
|Approvals:||Division 1, Class 1, Groups A, B, C & D
Ex d ia IIc T6
Intrinsically safe to 24 VDC, 50 mA,
|Operating Temperature:||-40 to +185°F (-40 to 85°C)|
|Installation Instructions:||- Connect electrical wires
- Lightly lubricate the position indicator O-rings (2)
- Fully insert switch into stop screw
- Rotate position indicator for optimum cable exit
- Secure set screws (2)
* See Product Confi gurator for additional options.
Available in: Arizona, S. Idaho, Montana, Nevada, W. North Dakota, W. South Dakota, Utah and Wyoming