Variable Speed Drives – TD Series

Standard Features:

• Often, a lower initial cost
• Few worries about motor overheating during low speed operation
• No motor brushes to replace
• Very compact and lightweight when compared to other mechanical drives
• Simple design with few rotating components to wear or replace
• Easily serviced by semi-skilled personnel
• Low maintenance – doesn’t need to be cycled through its speed range to prevent component damage
• 2 year warranty – your assurance of satisfactory product performance
• Attaches to MGS “C”, “F”, and “K” units for additional speed reduction.

Specifications:

• HP Ratings: 0.5 to 10
• Output Speeds: 2180 to 311 RPM
• Speed Range: 5:1 or 7:1
• Output Torques: Up to 496 in.lb.
• NEMA C-Face Input: 56C through 215TC
• Stainless steel nameplate and hardware
• NEMA C-Face Output: 56C through 182/184TC

Specifications:

• Horsepower ratings – from 1/2 to 10
• Output speeds – available from 1139 to 1.2 RPM
• Speed range – 5:1 to 7:1
• Output torques – up to 59,782 in.lbs.
• NEMA frames – from 56C to 215TC

Specifications:

• Horsepower ratings – from 1/2 to 71/2
• Output speeds – available from 528 to .6 RPM
• Speed range – 5:1 to 7:1
• Output torques – up to 9,744 in.lbs.
• NEMA frames – from 56C to 215TC

Specifications:

• Horsepower ratings – from 1/2 to 10
• Output speeds – available from 569 to .9 RPM
• Speed range – 5:1 to 7:1
• Output torques – up to 99,227 in.lbs.
• NEMA frames – from 56C to 215TC