Cover -plates Cover Plates are also known as “blanking plates”, “blocking plates”, or “cap-off plates”. They are used to cap off a pattern after a surface-mounted component is removed or they are used to cover an extra pattern to be utilized in the future. Crossover plates  (COP) are also referred to as “flushing plates”  and are typically used when flushing oil through the hydraulic system, enabling oil to reach the actuator.
D03 Cover Plate
DD03CPP
Material: Ductile Iron - D4512
5000* psi • 34.5 MPa
Valve Pattern: ISO 4401-03-02
NFP T3.5.1-D03
Circuit: Parallel Circuit
Cover Plate Diagram STOCKED
ITEM
 

* Working pressure should be considered in accordance with ISO 4413 to determine appropriate material type

Cover Plates